Regenerate cartridges 
Pure water for laboratory applications
Ultrapure water treatment for laboratory applications
Pure water is essential for most laboratory applications. Particles, suspended solids, dissolved salts, organic substances or gases, nucleases or pyrogens – all of these are undesirable components in water that not only interfere with a wide variety of laboratory applications, but can even falsify them.
Contaminated samples and equipment lead to serious error rates in analytical laboratories. Water used in general laboratory applications such as rinsing glass vessels is no less important. This is because residues in the water can affect critical applications. Impurities in the water also have a sensitive effect on the efficiency and service life of downstream systems. So that you can counteract such negative influences, we support you with high-quality systems for ultrapure water treatment – completely customized to your needs!
Customers & Solutions
Traditional hospital: pure water treatment for endoscopy
Internationally renowned traditional hospital uses EnviroFALK GREEN-LINE GEO 400 HS for cleaning and disinfection devices for endoscopy reprocessing (WD-E).A... mehr lesen
XFEL X-ray laser: Pure and ultrapure water treatment for laboratory technology
The European XFEL is a new research facility. The laboratory buildings will be equipped with water treatment systems from... mehr lesen
Treatment center: pure and ultrapure water for isolation ward
Berlin treatment and competence center opts for EnviroFALK pure and ultrapure water treatment to supply isolation ward.A hospital in... mehr lesen
Keine Einträge gefunden
Downloads
You might also be interested in
News from EnviroFALK
Good reasons to talk to us
When it comes to your pure and ultrapure water treatment, we don’t just provide you with any answer. Instead, we develop a solution that fits your challenges in every respect. This is very important: We listen to you carefully. We see ourselves as your partner and offer you competent support and relief.
All cleaning stages can be integrated in a dust and noise-protected closed housing or on an open frame. We adapt both designs optimally to your spatial conditions, pre-assemble them completely in our production facility and test them extensively. This saves time during installation – and ensures that the ultrapure water treatment system, which is then ready for connection and operation, can be commissioned quickly.
Hardly any two laboratories are the same. This is not only due to the equipment, but above all to the design for the specific purpose – a laboratory for material testing has different requirements than a research laboratory, particularly with regard to the required water qualities. And we know our way around that. We integrate your EnviroFALK pure and ultrapure water systems perfectly into any overall concept.
This fits well, because EnviroFALK systems are individual from A to Z and therefore unique.
Piping? Also available in PP using the infrared welding process (IR) or in PVDF using the bead and groove-free welding process (WNF). Limited space? We use every centimeter that is available for the processing system at your premises.
A good concept alone is not enough. Every component of our pure and ultrapure water system meets the highest requirements for consistently high water quality. The use of high-quality components and state-of-the-art control units in EnviroFALK water treatment systems ensure maximum safety.
